6-2 Service Manual
4062-XXX
Scheduled maintenance
Maintenance kit
The operator panel displays the message 80 Scheduled Maintenance at required maintenance intervals. It
is necessary to replace the fuser assembly, transfer roller, charge roll, and pick tires at this interval to maintain
the print quality and reliability of the printer. The parts are available as a maintenance kit with the following part
numbers:
After replacing the kit, the maintenance count must be reset to zero to clear the “80 Scheduled Maintenance”
message. See “Maintenance page counter reset (Reset Cnt)” on page 3-22.
Description Part number
Maintenance
Interval
Printer maintenance kit (100V) 40X4723 300K
Printer maintenance kit (110V) 40X4724 300K
Printer maintenance kit (220V) 40X4765 300K
Printer maintenance kit (100V type 2 fuser) 40X4766 150K
Printer maintenance kit (110V type 2 fuser) 40X4767 150K
Printer maintenance kit (220V type 2 fuser) 40X4768 150K
To Next Page
Loading...
