Repair information 4-107
4062-XXX
550-sheet pick arm bracket assembly removal
1. Remove the 550-sheet media tray assembly. Go to “550-sheet option tray assemblyl” on page 4-105.
2. Remove the two 550-sheet pick arm bracket assembly cable connectors (A) from the 550-sheet controller
card assembly.
3. Detach the 550-sheet bellcrank recoil spring (B) from the drawer.
4. Remove the four screws (C) securing the 550-sheet pick arm bracket assembly to the drawer.
5. Remove the 550-sheet pick arm bracket assembly.
To Next Page
Loading...
