4-38 Service Manual
4062-XXX
4. Detach the operator panel door assembly from the machine.
5. Remove the black plastic cover.
6. Remove the two screws (C) securing the USB socket to the assembly.
7. Remove the USB socket.
8. Disconnect the connector (D) from the assembly.
Operator panel hinge assembly, left removal (T650, T652, T654)
1. Remove the operator panel door assembly. Go to “Operator panel door assembly removal (T650, T652,
T654)” on page 4-37.
2. Remove the screw (A) securing the cover to the operator panel hinge assembly, left.
3. Remove the cover.
4. Detach the switch (B) from the operator panel hinge assembly, left.
To Next Page
Loading...
