EasyManua.ls Logo

Lexmark T650n - Sensor Test (High Capacity Output Stacker)

Lexmark T650n
526 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-14 Service Manual
4062-XXX
This test is used to determine whether or not the output bin sensor is working correctly for the output expander,
if installed.
1. Select Sensor Test from OUTPUT BIN TESTS.
2. Select Output Bin x (x=number of the output option to be tested) from Sensor Tests.
The following screen is displayed:
Output Bin x
passThru=Open Full=Open NearFull=Open
passThru–Pass thru sensor
Full–Bin full sensor
NearFull–Bin near full sensor
3. Manually actuate each of the output expander sensors, and the display by each sensor toggles from Open
to Closed.
4. Press Back or Stop to exit the test.
Sensor Test (high capacity output stacker)
1. Select Sensor Test from OUTPUT BIN TESTS.
2. Select Output Bin x (x=number of the output option to be tested).
The following screen is displayed:
HC Bin x TP=OPpassThru=Open Full=Open NearFull=Open
TP–High-capacity top position sensor
passThru–High-capacity pass thru sensor
Full–High-capacity bin full sensor (lower part of dual sensor)
NearFull–High-capacity bin near full sensor (upper part of dual sensor)
3. Manually actuate each of the sensors of the high-capacity stacker, and the display by each sensor toggles
from Open to Closed.
4. Press Back or Stop to exit the test.
Sensor Tests (5-bin mailbox)
1. Select Sensor Tests from OUTPUT BIN TESTS.
2. Select Output Bin x (x=number of the output option to be tested).
The following screen is displayed:
Output Bin x
P1=OP P2=OP L=NL
passThru–5-bin mailbox pass thru sensor shows Open or Closed
mailboxEmpty–5-bin mailbox empty sensor shows Normal for a normal level, NearFull for nearly full,
and Full for full.
3. Manually actuate each of the sensors of the 5-bin mailbox,. The pass thru sensor will indicate Open or
Closed and the empty sensor (mailboxEmpty) indicates Normal, NearFull, or Full.
4. Press Back or Stop to exit the test.
Deflector Test
This test verifies the functioning of each of the 5-bin mailbox output media deflectors. If more than one 5-bin
mailbox is installed, all installed deflectors are tested.

Table of Contents

Other manuals for Lexmark T650n

Related product manuals