4-112 Service Manual
4062-XXX
Upper interface cable assembly removal
1. Remove the 550-sheet frame assembly. Go to “550-sheet frame assembly removal” on page 4-109.
2. Disconnect the upper interface cable connector (A) from the 550-sheet controller card.
3. Release the two hooks (B) securing the options auto connect to the 550-sheet frame.
4. Remove the upper interface cable assembly.
Lower interface cable assembly removal
1. Remove the 550-sheet frame assembly. Go to “550-sheet frame assembly removal” on page 4-109.
2. Disconnect the lower interface cable connector (A) from the 550-sheet controller card.
3. Pinch the options auto connect (B) to separate the lower interface cable assembly from the 550-sheet
frame.
4. Remove the lower interface cable assembly.
To Next Page
Loading...
