3-4 Service Manual
4062-XXX
DUPLEX TESTS (if installed)
Quick Test See “Quick Test (duplex)” on page 3-9
Top Margin See “Top Margin (duplex)” on page 3-10
Sensor Test See “Sensor Test (duplex)” on page 3-10
Motor Test See “Motor Test (duplex)” on page 3-10
Duplex Feed 1 See “Duplex Feed 1” on page 3-11
Duplex Feed 2 See “Duplex Feed 2” on page 3-11
INPUT TRAY TESTS
Feed Tests See “Feed Tests (input tray)” on page 3-11
Sensor Test See “Sensor Test (input tray)” on page 3-12
OUTPUT BIN TESTS
Feed Tests See “Feed Tests (output bins)” on page 3-12
Feed To All Bins See “Feed To All Bins” on page 3-13
Sensor Test See “Sensor Test (standard output bin)” on page 3-13
Deflector Test (if 5-bin
installed)
See “Deflector Test” on page 3-14
FINISHER TESTS (if installed)
Staple Test See “Staple Test” on page 3-15
Feed Tests See “Feed Tests (finisher)” on page 3-15
Sensor Test See “Sensor Test (finisher)” on page 3-15
BASE SENSOR TEST See “BASE SENSOR TEST” on page 3-16
Toner See “Toner Level–Toner level sensor (remove the cartridge and
replace to actuate the sensor)” on page 3-16
Input See “Input–Input sensor” on page 3-16
Output See “Output–Output (exit) sensor” on page 3-16
NarrowMedia See “NarrowMedia–Output (exit) sensor” on page 3-16
Front Door See “Front Door–Front door sensor” on page 3-16
PRINTER SETUP
Defaults See “Defaults” on page 3-16
Page Count See “Printed Page Count” on page 3-16
Perm Page Count See “Perm Page Count (permanent page count)” on page 3-16
Serial Number See “Serial Number” on page 3-16
Engine Setting 1 through 4 See “Engine Setting 1 through 16” on page 3-17
Model Name See “Model Name” on page 3-17
Configuration ID See “Configuration ID” on page 3-17
Edge to Edge See “Edge to Edge” on page 3-17
To Next Page
Loading...
