2-46 Service Manual
4062
243.00 Media tray 3 area jam The media is jammed in the
media tray 3 area.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
243.02 Sensor (pass through)
late jam
Source = Tray 3
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-135.
243.03 Sensor (pass through)
late jam
Source = Tray 3
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-135.
243.04 Sensor (pass through)
late jam
Source = Tray 3
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-135.
243.05 Sensor (pass through)
late jam
Source = Tray 3
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-135.
243.06 Sensor (pass through)
late jam
Source = Tray 3
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-135.
243.08 Sensor (pass through)
lingering jam
Source = Tray 3
Media reached the sensor
(pass through) within the
specified time but did not clear
it within the specified time.
Go to sensor (pass through)
lingering jam service check.
See “Sensor (pass through)
lingering jam service check.”
on page 2-136.
243.10 Sensor (pass through)
late jam
Source = Tray 3
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-135.
243.13 Sensor (pass through)
static jam
Source = Tray 3
Media remains on the sensor
(input) during the warm up
sequence.
Go to sensor (pass through)
static jam service check.
See “Sensor (pass through)
static jam service check” on
page 2-137.
243.16 Sensor (pass through)
late jam
Source = Tray 3
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-135.
Error
code or
message
Error contents Description/Action Possible repair actions
To Next Page
Loading...
