Menu item Description
Auto Convert Color Faxes to Mono
Faxes
On
Off
Converts all outgoing faxes to black and white
Note: On is the factory default setting.
Fax Receive Settings
Menu item Description
Enable Fax Receive
On
Off
Allows fax jobs to be received by the printer
Note: On is the factory default setting.
Rings to Answer
1–25
Specifies the number of rings before answering an incoming fax job
Note: 1 is the factory default setting.
Auto Reduction
On
Off
Scales an incoming fax job so that it fits the size of the paper loaded in the designated
fax source
Note: On is the factory default setting.
Paper Source
Auto
Tray [x]
Multi-Purpose Feeder
Specifies the paper source selected to supply paper for the printer to print an incoming
fax
Output Bin
Standard Bin
Bin [x]
Specifies an exit bin for received faxes
Note: Bin 1 is available only when the finisher is installed.
Sides (Duplex)
Off
On
Enables duplex printing (two-sided printing) for incoming fax jobs
Separator Sheets
Off
Before Job
After Job
Enables the printer to include separator sheets for incoming fax jobs
Separator Sheet Source
Tray [x]
Manual Feeder
Specifies where the printer will pick the separator sheet
Fax Footer
Off
On
Prints the transmission information at the bottom of each page from a received fax
Note: Off is the factory default setting.
Max Speed
33600
2400
4800
9600
14400
Specifies the maximum speed in baud at which faxes are received
Understanding printer menus
168
To Next Page
Loading...
Need help?
General
