Menu item Description
Print Recovery
Jam Recovery
Auto
On
Off
Specifies whether the printer reprints jammed pages
Notes:
• Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Print Recovery
Page Protect
Off
On
Lets the printer successfully print a page that may not have
printed otherwise
Notes:
• Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the
entire page prints.
Sleep Button Settings
Press Sleep Button
Sleep
Do Nothing
Determines how the printer responds when pressing the Sleep
button in Idle state
Notes:
• Sleep is the factory default setting for Press Sleep Button.
• Do Nothing is the factory default setting for Press and Hold
Sleep Button.
• Sleep sets the printer to operate at a lower power setting.
• If the printer is in Sleep Mode, then the touch screen
appears off and the Sleep button turns amber in color.
• Touch anywhere on the touch screen or press a button on
the printer control panel to exit Sleep Mode.
Factory Defaults
Do Not Restore
Restore Now
Returns the printer settings to the factory default settings
Notes:
• Do Not Restore is the factory default setting. Do Not
Restore keeps the user-defined settings.
• Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads stored
in flash memory or on a printer hard disk are not affected.
Copy Settings menu
Menu item Description
Content Type
Text/Photo
Photo
Text
Graphics
Specifies the type of content in the copy job
Note: Text/Photo is the factory default setting.
Understanding printer menus
158
To Next Page
Loading...
Need help?
General
