7 Insert the tray.
8 If a different type or size of paper was loaded than the type or size previously loaded in the tray, then change the
Paper Type or Paper Size setting for the tray from the printer control panel.
Note: Mixing paper sizes or types in a paper tray may cause jams.
Loading the 650-sheet duo drawer
The 650-sheet duo drawer (Tray 2) consists of a 550-sheet tray and an integrated 100-sheet multipurpose feeder. The
drawer is loaded in the same way as the 250-sheet tray and the optional 550-sheet tray, and supports the same paper
types and sizes. The only differences are the look of the guide tabs and the location of the paper size indicators.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray
separately. Keep all other drawers or trays closed until needed.
1
2
3
1 Length guide tabs
2 Size indicators
3 Width guide tabs
Loading paper and specialty media
54
To Next Page
Loading...
Need help?
General
