7 Make sure the paper is as far into the multipurpose feeder as it will go with very gentle pushing. Paper should lie
flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or
wrinkled.
8 From the printer control panel, set the Paper Size and Paper Type.
Loading the manual feeder
The standard 250-sheet tray has an integrated manual feeder that can be used to print on different types of media one
sheet at a time.
1 Send a manual print job.
For Windows users
a With a document open, click File > Print.
b Click Properties, Preferences, Options, or Setup.
c Navigate to:
Paper tab > Paper type > Manual Paper > OK > OK
For Macintosh users
a With a document open, choose File > Print.
b From the Copies & Pages or General pop-up menu, choose Manual Paper.
c Click OK or Print.
2 When Load Single Sheet Feeder with [paper type] [paper size] appears, load the sheet
facedown into the manual feeder. Load envelopes on the left side of the feeder with the flap side up.
Note: Align the long edge of the sheet so that it is flush with the right side of the manual feeder.
Loading paper and specialty media
57
To Next Page
Loading...
Need help?
General
