Lexmark X548 Series - Page 191

Menu item Description
Enhance Fine Lines
Off
On
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
• Off is the factory default setting.
• You can set this option from the software program. For Windows users, click File >
Print > Properties > Preferences > Options, or Setup. For Macintosh users, choose
File > Print, and then adjust the settings from the print dialog and pop-up menus.
• To set Enhance Fine Lines using the Embedded Web Server, type the network printer
IP address in a browser window.
Color Saver
Off
On
Reduces the amount of toner used for graphics and images. The amount of toner used
for text is not reduced.
Notes:
• Off is the factory default setting.
• On overrides Toner Darkness settings.
RGB Brightness
-6 to 6
Adjusts brightness in color outputs
Notes:
• 0 is the factory default setting.
• -6 is the maximum decrease. 6 is the maximum increase.
• This does not affect files where CMYK color specifications are being used.
RGB Contrast
0–5
Adjusts contrast in color outputs
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
RGB Saturation
0–5
Adjusts saturation in color outputs
Notes:
• 0 is the factory default setting.
• This does not affect files where CMYK color specifications are being used.
Color Balance
Cyan
-5 to 5
Magenta
-5 to 5
Yellow
-5 to 5
Black
-5 to 5
Reset Defaults
0
Adjusts color in printed output by increasing or decreasing the amount of toner being
used for each color
Note: 0 is the factory default setting.
Understanding printer menus
191