Lexmark X950 Series User Manual

Copying
ADF Scanner glass
Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as magazine clippings).
Making copies
Making a quick copy
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 Adjust the paper guides when loading a document into the ADF.
Note: Make sure the size of the original document and the copy paper size are the same. Failure to set the proper
size may result to a cropped image.
3 From the printer control panel, press to start copying.
Copying using the ADF
1 Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 Adjust the paper guides.
3 From the home screen, navigate to:
Copy > change the copy settings > Copy It
Copying
105

Lexmark X950 Series Specifications

General

Print Technology	Color Laser
Monthly Duty Cycle	Up to 300, 000 pages
Fax Transmission Speed	33.6 Kbps
Standard Memory	1024 MB
Max Memory	2048 MB
Display Size	10.2-inch color touch screen
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac, Linux
Standard Connectivity	USB, Ethernet
Maximum Paper Size	12 x 18 inches
Scan Resolution	600 x 600 dpi
Scanner Type	Flatbed scanner with ADF
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard