88.xx [Color] cartridge very low
The specified print cartridge is very low.
1 For instructions on replacing a print cartridge, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
2yy.xx Close flatbed cover and load originals if restarting job
Try one or more of the following:
• Touch Cancel job to cancel the job and clear the message.
• Touch Scan from automatic feeder to resume the scan job from the ADF immediately following the last successfully
scanned page.
• Touch Scan from flatbed to resume the scan job from the scanner glass immediately following the last successfully
scanned page.
• Touch Finish job without further scanning to end the scan job at the last successfully scanned page.
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying, faxing,
and e-mailing.
280.06 Paper missing
Try one or more of the following:
• Touch Continue to clear the message.
• Touch Cancel job to cancel the job and clear the message.
• Touch Scan from automatic feeder to resume the scan job from the ADF immediately following the last successfully
scanned page.
• Touch Scan from flatbed to resume the scan job from the scanner glass immediately following the last successfully
scanned page.
• Touch Finish job without further scanning to end the scan job at the last successfully scanned page.
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying, faxing,
or e-mailing.
• Touch Restart job to clear the message and start a new scan job with the same settings as the previous job.
840.01 Scanner disabled by admin
Print without the scanner or contact your system support person.
840.02 Scanner disabled. Contact system administrator if problem persists.
Try one or more of the following:
• Touch Continue with scanner disabled to return to the home screen, and then contact your system support person.
• Touch Reboot and automatically enable scanner to cancel the job.
Note: This attempts to bring the scanner back online.
Troubleshooting
296