84.xx [color] photoconductor nearly low
1 Order a replacement photoconductor.
2 When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the
replacement part.
3 Touch Continue to clear the message and continue printing.
84.xx [color] photoconductor low
1 Order a replacement photoconductor immediately.
2 When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the
replacement part.
3 Touch Continue to clear the message and continue printing.
83.xx Transfer module missing
Insert the transfer module into the printer.
84.xx Replace [color] photoconductor
1 Replace the photoconductor, following the instruction sheet that came with the replacement part.
2 From the printer control panel, touch Continue to clear the message and continue printing.
88 Replace [color] cartridge
The specified print or toner cartridge is empty.
1 Replace the specified cartridge.
For instructions on replacing cartridge, from the printer control panel, touch More Information.
2 Touch Continue to clear the message and continue printing.
88.xx [color] cartridge low
1 Order a replacement toner cartridge immediately.
2 Remove the specified cartridge.
3 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
4 Reinsert the cartridge, and then touch Continue to clear the message and continue printing.
Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
Troubleshooting
295
To Next Page
Loading...
Need help?
General
