Lexmark X950 Series User Manual

Installing a memory card
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall
outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and
unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
An optional memory card can be purchased separately and attached to the system board.
1 Access the system board.
For more information, see “Accessing the system board” on page 33.
Note: This task requires a flathead screwdriver.
2 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
3 On the system board, open the memory card connector latches.
Additional printer setup
35

Lexmark X950 Series Specifications

General

Print Technology	Color Laser
Monthly Duty Cycle	Up to 300, 000 pages
Fax Transmission Speed	33.6 Kbps
Standard Memory	1024 MB
Max Memory	2048 MB
Display Size	10.2-inch color touch screen
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac, Linux
Standard Connectivity	USB, Ethernet
Maximum Paper Size	12 x 18 inches
Scan Resolution	600 x 600 dpi
Scanner Type	Flatbed scanner with ADF
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard