Lexmark X950 Series User Manual

281 paper jam
Paper jam in door A
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2 Determine where the jam is located, and then remove it:
a If the paper is visible under the fuser, then firmly grasp it on each side and pull it out.
Note: Make sure all paper fragments are removed.
b If the paper is not visible, then you will need to remove the fuser unit.
Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser.
1 Remove the thumbscrew from each side of the fuser unit by rotating them counterclockwise.
2 Lift the handles on each side of the fuser, and then pull to remove the fuser unit.
2
1
1
3 Firmly grasp the jammed paper on each side, and then gently pull it down and out.
2
1
Notes:
• Make sure all paper fragments are removed.
• If the paper is in the fuser, then lower the fuser nip release lever and switch it to envelope mode.
• After removing the jammed paper, return the lever to the proper position.
Clearing jams
272

Lexmark X950 Series Specifications

General

Print Technology	Color Laser
Monthly Duty Cycle	Up to 300, 000 pages
Fax Transmission Speed	33.6 Kbps
Standard Memory	1024 MB
Max Memory	2048 MB
Display Size	10.2-inch color touch screen
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac, Linux
Standard Connectivity	USB, Ethernet
Maximum Paper Size	12 x 18 inches
Scan Resolution	600 x 600 dpi
Scanner Type	Flatbed scanner with ADF
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard