Lexmark X950 Series - Security Audit Log Menu

Menu item Description
Automatic Method
Single pass
Multiple pass
Marks all disk space used by a previous print job and does not permit the file system
to reuse this space until it has been cleared
Notes:
• “Single pass” is the factory default setting.
• Only automatic wiping enables users to activate disk wiping without having to
turn the printer off for an extended amount of time.
• Highly confidential information should be wiped using only the Multiple pass
method.
Manual Method
Single pass
Multiple pass
Allows the file system to reuse marked disk space without having to wipe it first
Notes:
• “Single pass” is the factory default setting.
• Highly confidential information should be wiped using the Multiple pass method
only.
Scheduled Method
Single pass
Multiple pass
Allows the file system to reuse marked disk space without having to wipe it first
Note: “Single pass” is the factory default setting.
Security Audit Log menu
Menu item Description
Export Log Enables an authorized user to export the security log
Notes:
• To export the log from the printer control panel, a flash drive must be attached
to the printer.
• From the Embedded Web Server, the log can be downloaded to a computer.
Delete Log
Yes
No
Specifies whether audit logs are deleted
Note: Yes is the factory default setting.
Understanding printer menus
178