Lexmark X950 Series - Attaching Cables

1
2
Tandem-tray module
1 Tandem-tray module
2 2,000-sheet high-capacity feeder
5 Turn the printer back on.
6 Set the printer software to recognize the optional tray. For more information, see “Updating available options in
the printer driver” on page 54.
Attaching cables
CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.
Connect the printer to the computer using a USB cable or Ethernet cable.
Be sure to match the following:
• The USB symbol on the cable with the USB symbol on the printer
• The appropriate Ethernet cable to the Ethernet port
Additional printer setup
51