Menu item Description
Print Recovery
Jam Recovery
Auto
On
Off
Specifies whether the printer reprints jammed pages
Notes:
• Auto is the factory default setting. The printer reprints jammed
pages unless the memory required to hold the pages is needed
for other printer tasks.
• On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Print Recovery
Page Protect
Off
On
Lets the printer successfully print a page that may not have printed
otherwise
Notes:
• Off is the factory default setting. Off prints a partial page when
there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the entire
page prints.
Press Sleep Button
Sleep
Hibernate
Do Nothing
Determines how the printer responds when pressing the Sleep
button when the printer is idle
Notes:
• Sleep is the factory default setting.
• Sleep or Hibernate sets the printer to operate at a lower power
configuration.
• If the printer is in Sleep Mode, then the touch screen appears
off and the Sleep button turns amber in color.
• Touch anywhere on the touch screen or press a button on the
printer control panel to exit Sleep Mode.
• If the printer is in Hibernate mode, then the touch screen is
completely off and the Sleep button turns amber in color and
is blinking.
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Determines how the printer responds when pressing the Sleep
button when the printer is idle
Notes:
• Do Nothing is the factory default setting.
• Sleep or Hibernate sets the printer to operate at a lower power
configuration.
• If the printer is in Sleep Mode, then the touch screen appears
off and the Sleep button turns amber in color.
• Press and hold the Sleep button for 3 seconds or longer to enter
Hibernate mode.
• Touch anywhere on the touch screen or press a button on the
printer control panel to exit Sleep Mode.
Understanding printer menus
188
To Next Page
Loading...
