Standalone MX DVI-Plus family
User’s Manual
Section 5. Software control – Using Lightware Device Controller (LDC) Page 27 / 89
5.3. LDC Upgrade
Step 1. Run the application.
The Device Discovery window appears automatically and the program
checks the available updates on Lightware’s website and opens the
update window if the LDC found updates.
The current and the update version number can be seen in the top of the window
and they are shown in this window even with the snapshot install.
The update window can be also opened by clicking the About and the Update
button.
Step 2. Set the desired update setting in the option section.
a) If you do not want to check for the updates automatically, uncheck
the circle, which contains the green tick.
b) If you want to postpone the update, a reminder can
be set with different delays from the drop-down list.
c) If the proxy settings traverse the update process, set
the proper values then click the OK button.
Step 3. Click the Download update button to start the upgrading.
User can check updates manually by clicking the Check now button.
To Next Page
Loading...
Need help?
General
