Lightware MX16x16DVI-Plus - Commands - Quick Summary

Standalone MX DVI-Plus family
User’s Manual
Section 9. Commands – Quick summary Page 71 / 89
9. Commands – Quick summary
Switching and control commands
Command description
See in
chapter
Command
Switch one input to one output
8.4.1
{<in>@<out>}
Switch one input to all outputs
8.4.2
{<in>@O}
View connection on the specified output
8.4.3
{?<out>}
View connection on all outputs
8.4.4
{VC}
View mutes on all outputs
8.4.5
{VM}
Mute specified output
8.4.6
{#<out>}
Unmute specified output
8.4.7
{+<out>}
Lock specified output
8.4.8
{#><out>}
Unlock specified output
8.4.9
{+<<out>}
Save preset to the specified memory location
8.4.10
{$<id>}
Load preset from the specified location
8.4.11
{%<id>}
Preview preset
8.4.12
{VP#<id>=?}
Rename a preset
8.4.13
{PNAME#<id>=<preset_name>}
Rename an input
8.4.14
{INAME#<id>=<input_name>}
Rename an output
8.4.15
{ONAME#<id>=<output_name>}
Read a preset’s name
8.4.16
{PNAME#<id>=?}
Read an input’s name
8.4.17
{INAME#<id>=?}
Read an output’s name
8.4.18
{ONAME#<id>=?}
Reload default preset names
8.4.19
{PNAME#<id>=!}
Reload default input names
8.4.20
{INAME#<id>=!}
Reload default output names
8.4.21
{ONAME#<id>=!}
Reload factory default output setup
8.4.22
{r00}
Query IP settings
8.4.23
{IP_CONFIG=?}
Reload factory default IP settings
8.4.24
{IP_CONFIG=!}
Load DHCP IP settings (only IP address!)
8.4.25
{IP_CONFIG=D}
View LAN versions
8.4.26
{LAN_VER=?}
Port status commands
Command description
See in
chapter
Command
Input port status
8.5.1
{:ISD}
Output port status
8.5.2
{:OSD}