Linertec LTS-200 Series User Manual

Select the 1. RECEIVE RECT. DATA and press [ENT] to view FORMAT SELECTION
screen.
Select the DC1 format and press [ENT] to view
DATA RCV. CONFIRMATION screen.
(Same procedure is performed for CSV format.)
Set the PC to be ready to send and press [ENT] to
receive the data from the PC.
4.3.2 Sending Data
The data stored in the internal memory is sent to the
PC.
Including: 2.send RECT. DATA ；3.send POLAR
DATA
[RECT. DATA]
Select the 2.SEND RECT.DATA and press [ENT] to
view the FORMAT SELECTION screen.
Select DC1 format and press [ENT] to view the
DATA SEND. CONFIRMATION screen.
(Same procedure is performed for CSV format.)
NOTE: When Rect.data DC1 is selected and data is transmitted to PC, the DC1 format
PointCode data cannot be transferred.
If CSV or ExtCSV is selected, the PointCode data
can be transferred to PC.
Press [ENT], and set the PC to be ready to receive.
31

Linertec LTS-200 Series Specifications

General

Brand	Linertec
Model	LTS-200 Series
Category	Measuring Instruments
Language	English