8. STAKE OUT
From the known Station Point and Direction Angle, the Coordinates for the
Stake Out are obtained.
8.1 Stake Out
Press [F4] [FUNCTION] of the LinertecExpress screen
to view the“LINERTEC FUNCTION” screen.
Select 1.STAKE OUT and press［ENT］ or [select] to
view the “STAKEOUT METHOD SELECTION” screen.
Select 1.STAKE OUT and press [ENT] to input the IH,
press [ENT] to view the STATION POINT SETUP
screen.
Open the PN, X, Y, Z, IH and PC input window and input each. Save the data by pressing
[F1] [SAVE].
93
BSP
Stake Out Point
Station Point
To Next Page
Loading...
