Linertec LTS-200 Series User Manual

Press the [2] [COMMUNICATION] of the LinertecExpress to view the TRANSFER MENU
screen.
4.1 Text File read / write
Text file read/write allows you to input and output format and text data specified recording
media. Before taking this procedure, make sure of TextFile Setup (refer to “4.1.3. Text file
Setup”).
Press the [ENT] of the TRANSFER MENU screen
to view the TEXT FILE R/W screen.
4.1.1 Writing to Text File
This command allows you to transfer the existing measurement point data in the internal
memory to specified format per file.
When output Rectangular Data, select 1 and
in case of Polar Data, select 2, then press [ENT].
Press [F5] [SELECT] to select format and data save
place, then press [ENT].
[FORMAT SELECTION]
Rectangular Data
• DC1 (Extension DC1)
• CSV (Extension CSV)
• ExtCSV (Extension CSV)
※ Be careful that extension of CSV and ExtCSV
will be the same.
Polar Data
• DC1 (Extension DC1)
• AUX (Extension AUX)
• CSV (Extension CSV)
23

Linertec LTS-200 Series Specifications

General

Brand	Linertec
Model	LTS-200 Series
Category	Measuring Instruments
Language	English