Pairing Cameras11
Your cameras should be paired to the recorder and ready to use out of the package. If a camera
becomes unpaired, or if you have purchased a wire-free add-on camera (max. 8 cameras per sys-
tem), follow the instructions below.
• To pair cameras to your system using the Lorex Cirrus, see 11.1 Pairing Cameras with Lorex
Cirrus, page 35.
• To pair cameras to your system using the recorder interface, see 11.2 Pairing Cameras using
the Recorder Interface, page 36.
11.1 Pairing Cameras with Lorex Cirrus
1. From the Home screen, select your recorder from the list of devices.
2. Tap any free channel marked with a icon.
3. Tap Pair. A timer for 30 seconds appears.
#LX400115; r. 4.0/58631/58631; en-US 35
To Next Page
Loading...
Need help?
General
