Using the Main Menu13
1. From the Live View screen, click > Setup > General > Date and Time.
2. Click the check box beside Enable NTP to enable or disable NTP.
3. Select the desired NTP server from the drop-down next to Server Address (we recommend
using the default ntp.lorexddns.net).
4. Click Update Now to sync with the NTP.
NOTE
If the video format changes between NTSC and PAL based on your new choice of region, the recorder will
reboot automatically.
5. Click Save.
13.3.8 View System Information
View system information such as device ID, IP address, MAC address, model number, firmware
version and more.
#LX400115; r. 4.0/58631/58631; en-US 56
To Next Page
Loading...
Need help?
General
