Basic Setup4
4.1 STEP 1: Initial Setup
Before you begin, you will need to prepare the wire-free cameras and battery packs. The camera
battery comes partially charged (due to safety regulations). Please, fully charge the battery before
use and setup. You can charge the battery pack inside or outside of the camera.
To prepare the cameras:
1. Turn the adjustment ring counter-clockwise to loosen and angle the camera.
U424AA Series
2. Screw in the antenna.
U424AA Series
#LX400115; r. 4.0/58631/58631; en-US 8
To Next Page
Loading...
Need help?
General
