Basic Setup4
• Position the camera no more than 20ft (6.1m) away from the area you wish to monitor.
• Install the camera within range of the wireless receiver (noted in the camera’s specifications).
• For best performance, position the camera so that objects of interest will move from side-to-
side across the camera image, rather than moving towards or away from the camera.
• Ensure the camera image is free of obstructions (i.e., tree branches).
• This camera is weather resistant for outdoor use (IP66 rated). Installation in a sheltered loca-
tion is recommended.
• It is recommended that you customize motion settings for each camera on your system. See
4.4.3 Optimizing Motion Detection, page 15 for full details.
• Battery life will vary based on temperature, settings and number of events.
4.4.2 Mounting the Cameras
Follow the instructions below to mount the cameras.
To mount your cameras:
1. Set the mounting bracket to the desired mounting position.
2. Mark holes through the mounting bracket
3. Using the included drill bit, drill holes where marked.
4. Using the included screwdriver, secure the bracket with the provided mounting screws.
NOTE
• If you are mounting the camera into drywall, insert the included drywall anchors.
#LX400115; r. 4.0/58631/58631; en-US 13
To Next Page
Loading...
Need help?
General
