Using the Main Menu13
13.2.9 Setting up Email Notifications
You can configure the system to send email notifications about important activity from your se-
curity system. To have the option of using Lorex’s free email server (recommended) or using a
different one.
• For instructions on enabling email notifications using the Lorex server, see 13.2.9.1 Email
Notifications — Using the Lorex server (recommended), page 46.
• For instructions on enabling email notifications using a different mailing server, see 13.2.9.2
Email Notifications — Using your own server information, page 47.
13.2.9.1 Email Notifications — Using the Lorex server (recommended)
1. From the Live View screen, click
> Setup > Network > Email > Email
Configuration.
2. Select Default from the drop-down next to Email to enable the default Lorex mail server.
3. Click to enter up to 3 e-mail addresses that will receive e-mail notifications from the system.
4. Use the drop-down next to Interval to set the minimum amount of time between e-mail noti-
fications. This can be used to limit the number of notifications you receive throughout the
day.
5. Click Save.
E-mail notifications are now enabled. The default schedule is set to send e-mail notification
whenever motion is detected or a system warning occurs. To configure the schedule for e-
mail notifications, see 13.2.10 Setting an E-mail Schedule, page 47.
#LX400115; r. 4.0/58631/58631; en-US 46
To Next Page
Loading...
