Using the Main Menu13
1. From the Live View screen, click > Setup > Alarm > Deterrence.
2. Use the drop-down next to Channel to select a channel to set the deterrence schedule for.
3. Click or click-and-drag over existing bars to remove sections from the deterrence schedule.
For blank areas of the schedule, click or click-and-drag to add sections to the notification
schedule.
4. Click Save.
5. (OPTIONAL) Use the Copy function to copy your settings to another or all connected cam-
eras. See 13.1.1 Copying Channel Settings to Another Channel, page 40 for details on using
the copy function.
13.2.14 Configuring System Warning Settings
Set preferences for system warnings including video loss, hard drive errors, and warnings when
the hard drive is full.
To configure system warning settings:
1. From the Live View screen, click
> Setup > Alarm > Warning.
2. Check boxes next to features you would like to activate when the selected event occurs.
NOTE
Enabling Send Email requires you to set up e-mail notifications. See 13.2.9 Setting up Email Notifications,
page 46 for full instructions.
#LX400115; r. 4.0/58631/58631; en-US 51
To Next Page
Loading...
Need help?
General
