Pairing Cameras11
4. Press and hold the pairing button on the back of the camera until the red LED lights stop
flashing, then release the pairing button.
U424AA Series
NOTE
A “Pairing success!” message will appear on screen. If you do not see this message, repeat the steps above.
11.2 Pairing Cameras using the Recorder Interface
1. From the Live View screen:
• Click
in an empty channel screen.
OR
• Click
> Setup > Camera > Camera Setup, then click in an empty channel.
NOTE
You will have 30 seconds to pair the camera.
#LX400115; r. 4.0/58631/58631; en-US 36
To Next Page
Loading...
Need help?
General
