Basic Setup4
4.1 STEP 1: Initial Setup
Before you begin, you will need to prepare the wire-free cameras and Power Packs.
NOTE
Power packs come fully charged with no need for initial charging.
To prepare the cameras:
1. Attach an antenna to each camera. For LWB4800 / LWB4900 Series cameras, twist the adjust-
ment ring counterclockwise to reposition each camera as shown below. Twist clockwise to
tighten when finished.
LWB4800 / LWB4900 Series LWB5800 / LWB6800 Series
#LX400109; r. 2.0/54857/55689; en-US 7
To Next Page
Loading...
