Using the Main Menu13
1. From the live viewing screen, click > Advanced > Maintenance.
2. Click Load Settings.
3. The drive menu appears and displays the contents of the USB flash drive.
• Navigate to the system settings file you want to import, then click OK to begin.
• A warning message appears to inform you the system will reboot in order to properly im-
port your saved settings. Click OK to proceed.
NOTE
For more details on using the drive menu, including a full overview of buttons and their functions, see 10.3
Drive Menu Controls, page 36.
13.4.5 Configuring System Warning Settings
Set preferences for system warnings including video loss, hard drive errors, and warnings when
the hard drive is full.
To configure system warning settings:
#LX400109; r. 2.0/54857/55689; en-US 69
To Next Page
Loading...
Need help?
General