Using the Main Menu13
1. From the live viewing screen, click > Advanced > Maintenance.
2. Click Save Settings.
3. The drive menu appears and displays the contents of the USB flash drive. Navigate to the fold-
er you want the system settings file to be saved in, then click OK to begin. The progress bar at
the bottom of the window shows you the progress of the backup.
NOTE
• For more details on using the drive menu, including a full overview of buttons and their functions, see
10.3 Drive Menu Controls, page 36.
• See 13.4.4 Importing System Settings, page 68 for instructions on importing saved system settings.
13.4.4 Importing System Settings
Once you have created a system settings export (see 13.4.3 Exporting System Settings, page 67for
details), you can import the settings on another recorder.
Prerequisites:
• You must connect a USB flash drive to one of the recorder’s USB ports.
• The connected USB flash drive must have a system settings file saved on it. See 13.4.3 Export-
ing System Settings, page 67 for full instructions on saving settings to a USB flash drive.
To import system settings:
#LX400109; r. 2.0/54857/55689; en-US 68
To Next Page
Loading...
Need help?
General