Using the Main Menu13
NOTE
Disabled cameras will not show video during live viewing or record video to the hard drive.
To enable / disable cameras:
1. From the live viewing screen, click
> Settings > Camera Setup.
2. Select the channel for the camera you want to enable / disable.
3. Select ON or OFF.
4. Click Save.
13.2.3 Camera Firmware
In order to troubleshoot certain issues, technical support may ask you for the firmware version of
your wire-free cameras. Use the procedure below to determine the current version.
To check camera firmware:
#LX400109; r. 2.0/54857/55689; en-US 48
To Next Page
Loading...
Need help?
General