Hard Drive Installation18
3.2. Position the hard drive over the hard drive screw holes (×4) in the bottom panel of the
recorder.
3.3. Holding the hard drive securely in place, turn the recorder over. Keep holding the hard
drive while inserting the hard drive screws (×4) on the bottom panel of the recorder.
3.4. Turn the recorder back over.
4. Reattach the cover and replace the screws in the side and back panel of the recorder.
NOTE
recorder
You must format any newly-installed hard drive in order for it to function properly with the system. For
full instructions on formatting the hard drive, see , page .
#LX400109; r. 2.0/54857/55689; en-US 84
To Next Page
Loading...
Need help?
General