LSIS iXP2 Series - Page 109

Appendix 1. Troubleshooting
App 1-25
Object
Error code
Occurren
ce
location
Error message Reason and measure
Type Address
0x2E
XGT
Panel
Failed to Initialize
Update program.
XGT can’t be set as update mode
because of XGT Panel error. After
downloading new XGT Panel module
through homepage, etc., copy
UpdateNew.exe file among new
module to the
\\FlashDisk\LSISProduct\ directory of
XGT Panel through the movable
storage equipment. Then reboot the
XGT Panel and go update mode and
update again. If this symptom is
repeated, contact Customer Service
Center.