LSIS iXP2 Series - N:1 Setting

Chapter 5 XGT Panel Menu Explanation
5-33
5.3.8 N: 1 Setting
XGT Panel supports N: 1 service which enables communication between several XGT Panels and one PLC. You can set details
using the [N: 1 Settings] menu.
[PLC information]
[N: 1 setting]
[Explanation of the dialog box]
Menu
Explanation
Use N: 1 Communication
N: 1 Specifies whether to perform communication.
N: 1 station number
Enter the station number of N: 1 communication.
Number of XGT Panel
N: 1 Enter the number of XGT panels on communication.
Master Holding Time
Enter the master execution time of N: 1 communication.
Note
For detailed setting and understanding of N: 1 communication, refer to XP-Builder's N: 1 communication manual.