LSIS iXP2 Series User Manual

Chapter 7 Maintenance
7-2
7.3 Periodical Maintenance
Check the followings once or twice every six months and take measure.
Maintenance category
Maintenance
method
Criterion Action
Environment
Surrounding
Temperature
Measure through
Temperature
/Hygrometer Measure
of corrosive gas
0 ~ 50 °C
Modify it to meet
the general standard.
(Environment standard
in the panel)
Surrounding
Humidity
10 ~ 85%RH
Surrounding
pollution degree
No corrosive gas.
XGT Panel
Status
Unwinding, swing Move XGT Panel Fixed firmly Retighten screws
Dust, foreign
matter adhesion
Visual check Not loose -
Connection
status
Looseness
Retighten screw with
Screwdriver
Not loose Retighten screws
Reduce the distance
between compressed
terminals.
Visual check
Keep the proper
distance.
Correction
Loose connectors Visual check Not loose
Wind the fixed screw of
connector
Loose brackets
Retighten screw with
Screwdriver
Not loose Retighten screws
Power voltage maintenance
Check the power
voltage of input terminal
of power by test
AC: 100~240V
DC: 24V
Supply
power modification
Battery
Check when battery is
exchanged and voltage
drop is indicated.
(It is expressed
by system alarm)
• Check the total of
power stoppage time
and guarantee
duration
• There is no battery
voltage drop indication
If guarantee duration is
exceeded even tough
there is no battery
voltage drop indication,
change the battery.
LCD Backlight maintenance Visual check
Check the guarantee
duration
When error occurs,
change the backlight.
Touch status Touch Screen error Visual check
No damage or
Scratches and Pollution
When error occurs,
change the Touch
Panel

LSIS iXP2 Series Specifications

General

Brand	LSIS
Model	iXP2 Series
Category	Control Panel
Language	English