Chapter 5 XGT Panel Menu Explanation
5-38
5.5.3 Uploading a project using a storage device
1. If you touch [Upload Project] in the storage function menu, the following dialog box is displayed.
2. The upload path of USB memory and SD card is displayed as below.
- \ USB Storage \ XP_Backup \
- \ SD Storage \ XP_Backup \
3. Touch the [OK] button to transfer the project backup file in the machine to the path of the selected storage device.
4. The project backup file must be downloaded to download the project backup file when downloading the project.
If not selected, the project backup file is not stored in the device and therefore can not be transferred to the storage device.
To Next Page
Loading...
Need help?
General