LSIS XEC-DR32H - Page 209

Appendix 3 Compatibility with
Classification
GM7 XEC Type Contents Description
System
operation
state flag
_CPU_TYPE
_CPU_TYPE UINT
CPU type
information
Indicates the type information of PLC CPU
_VER_NUM _OS_VER UINT
OS Version
Number
OS version number of PLC CPU
_MEM_TYPE - UINT
Memory module
type
Program memory module type
(0:unmounted, 1~5:Type)
_SYS_STATE
-
WORD
PLC mode and
running state
Indicates operation mode and operation state of the
system.
_LOCAL_CON Local control
Indicates that operation mode can be changed by
mode key or PADT only
_STOP
STOP
Indicates running state of CPU module.
_RUN
RUN
_PAUSE-
PAUSE
_DEBUG
DEBUG
_CMOD_KEY
Running mode
change factor
Change the running mode by key
_CMOD_LPADT
Running mode
change factor
Change the running mode by PADT
_CMOD_RPADT
Running mode
change factor
Change the running mode by remote PADT
_CMOD_RLINK
Running mode
change factor
Change the running mode by communication
_USTOP_ON
Stopped by STOP
function
While RUN mode operation, stopped after scan
completion by STOP function
_FORCE_IN Forced input
Indicates that a forced On/Off for the input contact is
running.
_FORCE_OUT Forced output
Indicates that a forced On/Off for the output contact is
running.
_ESTOP_ON
Stopped by
ESTOP function
While RUN mode operation, stopped immediately by
ESTOP function
_REMOTE_CON
Remote mode
On
Indicates that it is operated by remote mode.
App. 3-6