LSIS XEC-DR32H User Manual

Chapter 6 CPU Functions
6.2 Parameter Setting
This paragraph describes how to set parameters.
6.2.1 Basic parameter setting
Clicking Basic Parameter in the project window shows the following window.
There are three main options ; “Basic Operation Setup” , “Device Area Setup” and “Error Operation
Setup”.
Category Item Description Note
Basic
operations
Fixed period
operation
Set the time of fixed period operation.
1~999 ㎳
Watchdog timer Set the time of scan watchdog.
10~1000 ㎳
Standard input filter Set the time of standard input filter.
1,3,5,10,20,70,100 ㎳
Restart mode Set restart mode Allowance/Prohibition
Output during
debugging
Set whether to allow output actually during
debugging operation.
Allowance/Prohibition
Keep output when
an error occurs
Set whether to preserve output holding
function set in I/O parameter in case of error.
Allowance/Prohibition
Memory
area
setting
Select latch area Set Retain range about M area
-
Pause/Resume
6- 2

LSIS XEC-DR32H Specifications

General

Brand	LSIS
Model	XEC-DR32H
Category	Controller
Language	English