LXNAV S100 - Page 4

Rev #37 Version 8.0 April 2021
Page 4 of 121
5.2 Info Mode 32
5.2.1 Quick Access Menu 32
5.3 FLARM Mode 33
5.3.1 Quick Access Menu 34
5.3.1.1 Edit Target 34
5.3.1.2 FLARM Traffic 34
5.3.2 FLARM Warnings 34
5.4 Thermal Assistant Mode 35
5.4.1 Quick Access Menu 35
5.5 Waypoint Mode 36
5.5.1 Quick Access Menu 36
5.5.2 Numerical page 37
5.5.3 Wind Page 38
5.5.4 AHRS Page 39
5.5.5 Quick Access Menu 39
5.6 Task Mode 40
5.6.1 Numerical Page 40
5.6.2 Wind Page 40
5.6.3 AHRS Page 41
5.6.4 Quick Access Menu 41
5.6.4.1 Editing navboxes 42
5.7 Setup Mode 43
5.7.1 QNH & RES 44
5.7.1.1 QNH 44
5.7.1.2 Safety Altitude 44
5.7.2 Flight Recorder 44
5.7.2.1 Recording Interval 44
5.7.2.2 Auto Finish 45
5.7.2.3 Finish Before OFF 45
5.7.2.4 Logger Always ON 45
5.7.2.5 Pilot 45
5.7.2.6 Co-Pilot 45
5.7.2.7 Competition Number 45
5.7.2.8 Registration Number 45
5.7.3 Vario Parameters 46
5.7.3.1 Vario Needle Filter 46
5.7.3.2 Vario Sound Filter 46
5.7.3.3 Netto Filter 46
5.7.3.4 Relative Filter 46
5.7.3.5 SC Filter 46
5.7.3.6 Smart Filter 46
5.7.3.7 Needle Range 47
5.7.3.8 Auto SC (Speed Command) 47
5.7.3.9 TE Compensation 47
5.7.3.10 Vario Average Time 48
5.7.3.11 Integrator Reset 48
5.7.3.12 Temperature Offset 49
5.7.3.13 Airspeed Offset 49
5.7.3.14 HAWK enable/disable 49
5.7.3.15 HAWK wind variance SIGWIND 49
5.7.3.16 HAWK Horizontal wind average 49