Rev #37
Version 8.0
April 2021
Page 74 of 121
5.7.13.2.9 External Target
If this item is checked the unit will accept target information received by the PDA, BT or GPS
ports. The user will see information on the screen that a new target has been received. The
user can accept or ignore the target.
5.7.13.3 Battery Setup
S10x units have 2 options listed:
• External battery
• Internal battery
5.7.13.3.1 External Battery Chemistry
The user must select the battery from the battery list to obtain the proper voltage
measurement.
Batteries used in gliders today are not only the old-style lead acid battery but also
Lithium Ion (LiIon) and Lithium Iron Phosphate (LiFePo) are available.
Each battery type has a different power delivery curve and it is now possible to configure the
Low and High Battery warnings.
Select battery from list gives you a drop-down list with the suggested battery settings for Full
Voltage, Low Battery Voltage and Empty Voltage as pre-sets. Selecting one of these will set
the values in the following boxes.
To Next Page
Loading...
