LXNAV S100 - Default Chapter; Table of Contents

Rev #37 Version 8.0 April 2021
Page 3 of 121
1 Important Notices 8
1.1 Limited Warranty 8
2 Packing Lists 9
2.1 S80 (80mm) Variometer Unit 10
2.2 S8 (57mm) Variometer Unit 11
2.3 S10 (57mm) Variometer Unit 12
2.4 S100 (80mm) Variometer Unit 13
2.5 S10D and S8D Repeater Unit 14
2.6 S100D and 80D Repeater Unit 15
3 Basics 16
3.1 LXNAV S8x/S10x at a Glance 16
3.2 LXNAV S8x/S10x Features 17
3.2.1 Interfaces 17
3.2.2 Options 17
3.2.3 S8/S80 Club 17
3.2.4 Technical Data 18
3.2.4.1 Power Consumption 18
3.2.4.2 Size and Weight 18
4 System Description 19
4.1 Push Button – Rotary Switches 19
4.1.1 Power Button 19
4.2 Rotary Switches 19
4.3 Buttons (Three) 20
4.4 Switching on the Unit 20
4.5 User Input 21
4.5.1 Text Edit Control 21
4.5.2 “Spin” Control 22
4.5.3 Selection Control 22
4.5.4 Checkbox and Checkbox List 22
4.5.5 Slider Selector 23
4.6 Switching Off 23
5 Operating Modes 24
5.1 Quick Access Menus 25
5.1.1 MC/BAL 25
5.1.2 Reset G 25
5.1.3 Layout 25
5.1.3.1 Layout in the Numerical Page 26
5.1.3.2 Layout in the Graphical Page 27
5.1.4 Select / Select Near (Only in WPT mode) 29
5.1.5 WPT Elevation 29
5.1.6 Edit Target 29
5.1.7 FLARM Traffic 29
5.1.8 Event 29
5.1.9 Night 29
5.1.10 Edit Task (Only in Task Mode) 30
5.1.11 Start Task (only in Task Mode) 30
5.1.12 Restart Task (only in Task Mode) 30
5.1.13 Next Waypoint (only in Task Mode) 30
5.1.14 Send WPT 31
5.1.15 Load/Save 31
5.1.16 Export 31
5.1.17 Wind 31