M-Audio Oxygen Pro Series User Manual

78
Second: The Encoder will send the MIDI CC number with this value at the second notch of the
turn.
Available Values: 0-127
Third: The Encoder will send the MIDI CC number with this value at the third notch of the turn.
Available Values: 0-127
Last: The Encoder will send the MIDI CC number with this value at the final notch of the turn.
Available Values: 0-127
When set to CC IN/DC, these are the available parameters:
CC: The Encoder will send its MIDI messages using this CC number.
Available Values: 0-127
Min: The lowest value in the range of values will correspond with this setting.
Available Values: 0-127
Max: The highest value in the range of values will correspond with this setting.
Available Values: 0-127
When set to CC Relative, these are the available parameters:
CC: The Encoder will send its MIDI messages using this CC number.
Available Values: 0-127
Type: The Encoder will send a value number in the range of values when you turn it left or
right.
Available Values:
• Right 65, Left 63
• Right 63, Left 65
• Right 127, Left 01
• Right 01, Left 127

M-Audio Oxygen Pro Series Specifications

General

Knobs/Encoders	8
Aftertouch	Yes
Key Action	Semi-weighted
Arpeggiator	Yes
Smart Chord/Chord Mode	Yes
Smart Scale/Scale Mode	Yes
Faders	9
Connectivity	USB
Pedal Inputs	Sustain
Power	USB bus power
Software	Pro Tools First, MPC Beats, Ableton Live Lite, AIR Music Tech Virtual Instruments (Hybrid 3, Velvet, Mini Grand, Vacuum Pro)
DAW Compatibility	Ableton Live, Logic Pro
Key Count	25, 49, 61