91
When set to Note, these are the available parameters:
Note: The pad will send its MIDI messages using this Note number.
Available Values: C-2 – G8
Latch: When set to Latch On, the pad will send one value when pressed and a different value
when pressed a second time, alternating between the two values with each press. When set to
Latch Off, the pads will send one value when pressed and one value when released.
Available Values: On/Off
Note On: When Latch is active, the pad will send the MIDI note number with this velocity when
you press it to turn it on.
Available Values: 0-127
Note Off: When Latch is active, the pad will send the MIDI note number with this velocity
when you press it to turn it off.
Available Values: 0-127
When set to CC, these are the available parameters:
CC: The pad will send its MIDI messages using this CC number.
Available Values: 0-127
Press: The pad will send the MIDI CC number with this value when you press it.
Available Values: 0-127
Release: The pad will send the MIDI CC number with this value when you release it.
Available Values: 0-127
To Next Page
Loading...
