16 Series, Model - 2816 HST
106
Fuel Injection Pump and Nozzle Check
The fuel injection pump and nozzles are precision units and must be
serviced only by your dealer.
The injection pump is correctly set and sealed at the factory and should
not require an adjustment. Whenever adjustments or repairs are neces-
sary, see your dealer. Do not tamper with any of the pump units.
INJECTION PUMP
NOZZLE
M149A
LUBRICATION/FILTERS/FLUIDS _____________________________________________
Hydraulic oil or diesel fuel leaking under pressure can penetrate the
skin and cause infection or other injury.
To Prevent Personal Injury:
Relieve all pressure, before disconnecting fluid lines.
Before applying pressure, make sure all connections are tight and
components are in good condition.
Never use your hand to check for suspected leaks under pressure.
Use a piece of cardboard or wood for this purpose.
If injured by leaking fluid, see your doctor immediately.
To Next Page
Loading...
