Mahindra 2816 HST User Manual

16 Series, Model - 2816 HST
82
BOLTS AND NUTS POSITIONS TORQUE
Front wheel disc
118 to 132 Nm (87 to 98 LB FT)
to axle hub bolts
Tie rod end nuts 59 to 88 Nm (43 to 65 LB FT)
FRONT WHEEL ADJUSTMENT
The front wheels are tightened with six bolts for MFD to the axle hubs.
Torques for wheel bolts and tie rod end nuts as follows:
Check the bolts to keep them tight at the intervals recommended in the
Service Chart in this manual.
NOTE: The front wheel of tires must always be assembled with the
valve side out.
87 to 98 LB FT
(118 to 132 Nm)
TIRES/WHEELS/SPACING/BALLAST __________________________________________

Mahindra 2816 HST Specifications

General

Brand	Mahindra
Model	2816 HST
Category	Lawn Mower
Language	English